Specifications

• mfg_part_number RCM4200
• Microprocessor Rabbit® 4000 at 29 MHz
• EMI Reduction Spectrum spreader for reduced EMI (radiated emissions)
• Ethernet Port 10/100Base-T, RJ-45, 3 LEDs
• Data SRAM 512K (8-bit)
• Program Execution Fast SRAM -
• Flash Memory 512K (8-bit)
• Serial Flash Memory 4 MB
• Backup Battery Connection for user-supplied backup battery (to support RTC and data SRAM)
• General-Purpose I/O 35 parallel digital I/O lines:
• Additional Inputs 2 startup mode, reset in
• Additional Outputs Status, reset out
• Analog Inputs -
• A/D Converter Resolution -
• A/D Conversion Time (including 120 μs raw) -
• Auxiliary I/O Bus Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
• Serial Ports 5 shared high-speed, CMOS-compatible ports:
• Serial Rate Maximum asynchronous baud rate = CLK/8
• Slave Interface Slave port allows the RCM4200 to be used as an intelligent peripheral device slaved to a master processor
• Real-Time Clock Yes
• Timers Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and 8 set/reset registers
• Watchdog/Supervisor Yes
• Pulse-Width Modulators Yes
• Input Capture 2 input capture channels can be used to time input signals from various port pins
• Quadrature Decoder 2 quadrature decoder channels accept inputs from external incremental encoder modules
• Power (pins unloaded) 3.0–3.6 V DC, 200 (typ.) mA @ 3.3 V,
• Operating Temperature -40° C to +85° C
• Humidity 5% to 95%, non-condensing
• Connectors One 2 × 25, 1.27 mm pitch IDC signal header, One 2 × 5, 1.27 mm pitch IDC programming header
• URL