RabbitCore ® RCM3209 Series Microprocessor Core Module RCM3209
Features
Rabbit 3000 microprocessor at 44 MHz
Optional 10/100Base-T Ethernet
512K Flash / 256K SRAM / 512K Program Execution SRAM
52 digital I/O and 6 serial ports for multiple connectivity options
Rabbit® 3000 microprocessor @ 44.2 MHz
Battery-backed real-time clock
Low power “sleepy” modes
Easily interfaces with another processor-based board for distributed embedded systems
Known good hardware to reduce design effort
Mount directly on a user-designed motherboard
Dynamic C® development environment for real-time development
Debug software directly on the target hardware
Rabbit® 3000 microprocessor @ 44.2 MHz
Battery-backed real-time clock
Low power “sleepy” modes
Easily interfaces with another processor-based board for distributed embedded systems
Known good hardware to reduce design effort
Mount directly on a user-designed motherboard
Dynamic C® development environment for real-time development
Debug software directly on the target hardware
Specifications
Specifications
mfg_part_numberRCM3209
MicroprocessorFeatures
EMI ReductionSpectrum spreader for reduced EMI (radiated emissions)
Ethernet Port10/100Base-T, RJ-45, 3 LEDs
Flash Memory512K
Data SRAM256K
Program Execution SRAM512K
Backup BatteryConnection for user-supplied backup battery (to support RTC and data SRAM)
General-Purpose I/O52 parallel digital I/0 lines:
Additional InputsStartup mode (2), reset in
Additional OutputsStatus, reset out
External I/O BusCan be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
Serial Ports6 shared high-speed, CMOS-compatible ports:
Serial RateMaximum asynchronous baud rate = CLK/8
Slave InterfaceA slave port allows the RCM3209/RCM3229 to be used as an intelligent peripheral device slaved to a master processor, which may either be another Rabbit 3000 or any other type of processor
Real-Time ClockYes
TimersTen 8-bit timers (6 cascadable), one 10-bit timer with 2 match registers
Watchdog/SupervisorYes
Pulse-Width Modulators10-bit free-running counter and four pulse-width registers
Input Capture2-channel input capture can be used to time input signals from various port pins
Power3.15V to 3.45VDC 325 mA @ 3.3V
Quadrature DecoderEdge connectors for interface with 52-pin mini PCI Express socket