Rabbit ® Minicore ® RCM6600W Series Ultra-Compact Wi-Fi Module RCM6600W
  • Guaranteed Satisfaction
  • Easy Returns
  • Authorized Reseller
  • Best Practice
Call for price

Order Now to ship Tomorrow

OR
Manufacturer Part Number:
RCM6600W
Sku:
RCM6600W

Features

 

Rabbit® 6000 running at 162.5 MHz

 
 

On-board single-chip 802.11b/g transceiver & 10/100 Ethernet

 
 

4 A/D inputs 12 bit resolution

 
 

1 MB of SRAM and up to 4 MB of serial flash

 
 

Up to 32 GPIO lines and 6 serial ports

 

Specifications

Specifications

  • mfg_part_number RCM6600W
  • Microprocessor Features
  • Network peripherals 10/100Base-T (Ethernet Signals only)
  • EMI Reduction Spectrum spreader for reduced EMI (radiated emissions)
  • Serial Flash Memory (program) 1 MB
  • SRAM 1 MB
  • Battery-Backable SRAM 32 KB (Internal)
  • Backup Battery Connection for user-supplied backup battery (to support RTC)
  • General Purpose I/O Up to 35 parallel digital I/O lines configurable with 4 layers of alternate functions, plus FIM (Flexible Interface Module) control.
  • Analog Inputs 0,2 or 4-inputs shared with PE0,1 or PE2,3. 12 bit resolution, 11 bits performance at upto 1 Msample/sec (125 ksample/sec for any one input with no CPU overhead). Input range 100mV to Vcc-100mV typical.
  • Additional Inputs Reset in
  • Additional Outputs Status, reset out
  • External I/O Bus Can be configured for 8 data lines 8 address lines (shared with parallel I/O lines), plus I/O read/write
  • Serial Ports 6 high-speed, CMOS-compatible ports:
  • Serial Rate Maximum asynchronous baud rate = CLK/8
  • Slave Interface Slave port allows the module to be used as an intelligent peripheral device slaved to a master processor
  • Real-Time Clock Yes
  • Timers Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers, and one 16-bit timer with 4 outputs and 8 set/reset registers
  • Watchdog/Supervisor Yes
  • Pulse-Width Modulator 4 channels synchronized PWM with 10-bit counter or 4 channels variable-phase or synchronized PWM with 16-bit counter
  • Input Capture 2-channel input capture can be used to time input signals from various port pins
  • Quadrature Decoder 2-channel quadrature decoder accepts inputs from external incremental encoder modules
  • Power 3.15 V DC (min.) - 3.45 V DC (max.)
  • Operating Temperature -30° C to +55° C
  • Humidity 5% to 95%, non-condensing
  • Connectors Edge connectors for interface with 52-pin mini PCI Express socket
  • Board Size 1.20 in × 2.00 in × 0.40 in (30 mm × 51 mm × 10 mm)
  • Typical Average Antenna Output Power Other Regions
  • Compliance 802.11b/g, 2.4 GHz
  • URL
 
  Loading...