PortServer TS 4 P MEI (mid- and end-span PoE) (International)
Features
PortServer TS P MEI makes it easy to connect RS-232/422/485 serial devices to an IP network. By supporting versatile powering options like powered Ethernet and powered serial, this serial server can adapt to many applications where traditional power alternatives are required.
Specifications
Specifications
ManagementHTTP/HTTPS, CLI, SNMP (read/write), Digi Port Authority-Remote management diagnostics and auto-discovery tool
ProtocolsUDP/TCP, PPP, DHCP/RARP/ARP-Ping for IP Address assignment, Extended Telnet RFC 2217, Telnet, Reverse Telnet, Modbus to Modbus/TCP protocol conversion support
SoftwareSupports Digi’s Realport® COM port redirector
SecuritySSHv2
Status LEDsLink, Power
Operating SystemsAIX, HP-UX, Solaris, Linux®, Windows® 2000, Windows® XP, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10, Windows Server® 2003, Windows Server® 2008, Windows Server® 2012. Note: TCP/UDP socket services are operating system independent
Dimensions
(L x W x D)5.25 in x 3.33 in x 0.95 in (13.34 cm x 8.46 cm x 2.42 cm)
Weight2.25 oz (64.00 g)
Other802.3af powered Ethernet (mid- and end-span); Full modem and hardware flow control, Modem emulation, Port buffering, RJ45-DB-9F console adapter included for optional serial configuration
Ports2 RS-232/422/485 RJ-45 (switch selectable); Up to 230 Kbps throughput; Signal support for TXD, RXD, RTS, CTS, DTR, DSR, DCD
Ports1 RJ-45 10/100 Mbps 10/100Base-T (auto-sensing); Full or half duplex
Power Input9-30 VDC
Power Supply (included)North America: 12 VDC/.5A max out; 120 VAC in (wall mount); International: 12 VDC/.5A max out; 100-240 VAC in (small brick)
Power ConsumptionTypical: 4 W; Max: 6 W
Product Surge Protection (ESD)4 kV burst (EFT) per EN61000-4-4, 2 kV surge transient per EN61000-4-5
Powered EthernetEthernet Power, IEEE 802.3af compliant, pins 4/5(+) and 7/8(-); 4 kV burst (EFT) per 1000-4-4; 2 kV surge per EN61000-4-5
Serial Power InputDC input connector, 9-30 VDC, 525 mA max; Serial Port 1, Pin 1 (RI), 9-30 VDC, 525 mA max
Serial Power OutputAvailable on all serial ports; 1 watt available power with selectable voltage level; Pin 1 (RI) 5 VDC up to 200 mA max; Pin 9 (DTR) 9 VDC up to 100 mA max
Operating Temperature0° C to 50° C (32° F to 122° F)
Relative Humidity5% to 90% (non-condensing)
Ethernet Isolation1500 VAC min per IEEE802.3/ANSI X3.263
Serial Port Protection (ESD)15 kV human body model
Safety UL 1950, CSA 22.2 No. 950
Emissions/ImmunityCE, FCC Part 15 (Class A), EN55024, EN55022 Class A