ConnectPort X2 – XBee (802.15.4) to Ethernet. Industrial enclosure. International.
Features
ConnectPort X2 is a small XBee to Ethernet gateway that provides low-cost IP networking of XBee-enabled devices and sensor networks. Featuring a simple development environment, ConnectPort X2 enables custom applications to run locally while interfacing across existing Ethernet networks for WAN connectivity to a centralized server.
ConnectPort X2 gateways benefit from the enhanced management capabilities offered by Digi Remote Manager. This web-based device management system enables remote access and control of your Digi gateways.
ConnectPort X2 products feature rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESP™ provides an IDE featuring device detection, debugging, compiling and downloading of Python code to Digi gateways.
Specifications
Specifications
ManagementHTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via Digi Remote Manager
ProtocolsUDP/TCP, DHCP, SNMPv1
Total Memory8 MB Flash, 16 MB RAM
LEDsEthernet status, Power, link/activity
SecuritySSL tunnels
Dimensions
(L x W x H)5.50 in x 2.75 in x 1.13 in (13.9 cm x 7.0 cm x 2.9 cm);
0.44 lb (0.20 kg)
Data Rate and Mode10/100 Mbps (auto-sensing); Full or half duplex (auto-sensing)
Power Input9-30 VDC
Power Supply12 VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included;
Extended temperature power supply available separately
Power ConsumptionIdle: 1.2 W, Max: 3.4 W
Surge Protection (w/included power supply)4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
Operating Temperature-30° C to +70° C (-22° F to +158° F)
Relative Humidity5% to 95% (non-condensing)
Ethernet Isolation1500 VAC min per IEEE802.3/ANSI X3.263