APC Smart-UPS RT 20kVA RM 230V
High density, double-conversion on-line power protection with scalable runtime
Includes: CD with software, Rack Mounting support rails, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Manageable external batteries
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Removable input/output wiring tray
Allows quick and easy installation and maintenance of the UPS.
Single or three-phase input wireable
Provides flexibility for the UPS to be installed using either single or three-phase input wiring.
Input ConnectionsHard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Maximum Input Current115.0A
Marketing Features
Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Protection
Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Cold-start capableProvides temporary battery power when the utility power is out.
Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.
Manageability
LED status indicatorsQuickly understand unit and power status with visual indicators.
Serial connectivityProvides management of the UPS via a serial port.
SmartSlotCustomize UPS capabilities with management cards.
InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.
Network manageableProvides remote power management of the UPS over the network.
Adaptability
Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.
Availability
Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.
Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtimeAllows additional run time to be quickly added as needed.
Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced
Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.
Disconnected battery notificationWarns when a battery is not available to provide backup power.
Audible alarmsProvides notification of changing utility power and UPS power conditions
User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
Output
Max Configurable Power (Watts)16.0kWatts
/ 20.0kVA
Output Voltage NoteConfigurable for 400 or 415V 3 Phase nominal output voltage
Output Voltage DistortionLess than 5%
Output Frequency (sync to mains)50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220, 240
Load Crest Factor3 : 1
TopologyDouble Conversion Online
Waveform typeSine wave
Overload Operation60 seconds @ 125% and 30 seconds @ 150%