APC Back-UPS BE850M2, 850VA, 2 USB charging ports, 120V
APC Back-UPS BE850M2, 850VA, 2 USB charging ports, 120V
Features
BE850M2 Features
APC Back-UPS BE850M2, 850VA, 2 USB charging ports, 120V
Battery Backup & Surge Protector for Electronics and Computers
Includes: USB cable, User Manual
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.
Transformer Block Spacing
Connect bulky transformer block plugs without covering up other outlets.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Specifications
Specifications
- Key Features
-
Output power capacity
450Watts
/ 850VA
-
Output Connections
(3)
NEMA 5-15R
(Surge Protection)
(6)
NEMA 5-15R
(Battery Backup)
-
Nominal Output Voltage
120V
-
Nominal Input Voltage
120V
-
Input Connections
NEMA 5-15P
-
Cord Length
5ft
(1.52meters)
-
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Manageability
-
LED status display
Quickly understand unit and power status with visual indicators.
-
Audible alarms
Provides notification of changing utility power and UPS power conditions
-
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Availability
-
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
-
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- Protection
-
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
-
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
- Output
-
Max Configurable Power (Watts)
450Watts
/ 850VA
-
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
-
Topology
Standby
-
Waveform type
Stepped approximation to a sinewave
-
Transfer Time
6ms typical : 10ms maximum
- Input
-
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
-
Input voltage range for main operations
92 - 139V
-
Number of Power Cords
1
- Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
8hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
2 - 5
-
Battery Charge Power (Watts)
13Watts
-
Battery Volt-Amp-Hour Capacity
104
-
Runtime
-
Efficiency
- Communications & Management
-
Interface Port(s)
USB
-
Control panel
LED status display with On Line : On Battery : Replace Battery and Building Wiring Fault
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
-
Surge energy rating
354Joules
- Physical
-
Maximum Height
5.47inches
(139MM, 13.9CM)
-
Maximum Width
12.87inches
(327MM, 32.7CM)
-
Maximum Depth
4.13inches
(105MM, 10.5CM)
-
Net Weight
9.04lbs.
(4.1KG)
-
Shipping weight
9.7lbs.
(4.4KG)
-
Shipping Height
7.72inches
(196MM, 19.6CM)
-
Shipping Width
16.38inches
(416MM, 41.6CM)
-
Shipping Depth
6.61inches
(168MM, 16.8CM)
-
Color
Black
-
Master Carton Units
2.0
-
Master Carton Weight
21.61lbs.
(9.8)
-
# of Layers per Pallet
5.0
-
# of Units per Layer per Pallet
16.0
-
Pallet Weight
912.71lbs.
-
Units per Pallet
80.0
-
SCC Codes
1073130432526 7
- Environmental
-
Operating Temperature
32 - 104 °F
(0 - 40 °C)
-
Operating Relative Humidity
0 - 95 (non-condensing) %
-
Operating Elevation
0-10000ft
(0-3000meters)
-
Storage Temperature
-15 - 45 °C
-
Storage Relative Humidity
10 - 90 %
-
Storage Elevation
0-50000ft
(0-15000meters)
-
Audible noise at 1 meter from surface of unit
45.0dBA
- Conformance
-
Approvals
California (CEC) Battery Charger, CSA C22.2 NO. 107.3, cTUVus, FCC Part 15 Class B, UL 1778
-
Equipment protection policy
Lifetime : $75000
-
Standard warranty
3 years repair or replace
- Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains SVHCs
-
Proposition 65 Warning
Available in Documentation tab
-
URL