Specifications

• Key Features
• Output power capacity 6.0kWatts / 6.0kVA
• Output Connections (4) IEC 320 C19 (Battery Backup) (2) IEC Jumpers (Battery Backup) (1) Hard Wire 3-wire (2PH + G) (Battery Backup) (6) IEC 320 C13 (Battery Backup)
• Nominal Output Voltage 208V
• Nominal Input Voltage 208V
• Input Connections Hard Wire 3-wire (2PH + G)
• Marketing Features
• Save time with easy and convenient remote/network accessibility. Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
• Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.
• Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
• Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
• Protection
• Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
• Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
• Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Cold-start capable Provides temporary battery power when the utility power is out.
• Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Manageability
• LED status indicators Quickly understand unit and power status with visual indicators.
• Serial connectivity Provides management of the UPS via a serial port.
• SmartSlot Customize UPS capabilities with management cards.
• InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
• Network manageable Provides remote power management of the UPS over the network.
• Adaptability
• Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
• Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
• Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
• Availability
• Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
• Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Scalable runtime Allows additional run time to be quickly added as needed.
• Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
• Serviceability
• Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement.
• Disconnected battery notification Warns when a battery is not available to provide backup power.
• Audible alarms Provides notification of changing utility power and UPS power conditions
• User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Output
• Max Configurable Power (Watts) 6.0kWatts / 6.0kVA
• Output Voltage Distortion Less than 2%
• Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
• Other Output Voltages 240
• Load Crest Factor 3 : 1
• Topology Double Conversion Online
• Waveform type Sine wave
• Bypass Internal Bypass (Automatic and Manual)
• Input
• Input frequency 40 - 70 Hz (auto sensing)
• Input voltage range for main operations 160 - 275V
• Input voltage adjustable range for mains operation 100 - 275 (half load)V
• Other Input Voltages 240
• Batteries & Runtime
• Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
• Typical recharge time 1.5hour(s)
• Nominal Battery Voltage 192V
• Replacement Battery SRT192BP2US
• Expected Battery Life (years) 3 - 5
• RBC Quantity 1
• Extendable Run Time 1
• Battery Volt-Amp-Hour Capacity 875
• Extended Run Options APC-Smart-UPS-SRT-6000VA-208V-IEC
• Runtime View Runtime Graph View Runtime Chart
• Efficiency View Efficiency Graph
• Communications & Management
• Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
• Control panel Multi-function LCD status and control console
• Audible Alarm Audible and visible alarms prioritized by severity
• Emergency Power Off (EPO) Yes
• Available SmartSlot™ Interface Quantity 1
• Surge energy rating 480Joules
• Physical
• Maximum Height 17.0inches (432MM, 43.2CM)
• Maximum Width 6.85inches (174MM, 17.4CM)
• Maximum Depth 28.32inches (719MM, 71.9CM)
• Net Weight 132.0lbs. (59.87KG)
• Shipping weight 147.4lbs. (66.86KG)
• Shipping Height 14.57inches (370MM, 37.0CM)
• Shipping Width 24.02inches (610MM, 61.0CM)
• Shipping Depth 37.8inches (960MM, 96.0CM)
• Color Black
• Units per Pallet 6.0
• Environmental
• Operating Temperature 32 - 104 °F (0 - 40 °C)
• Operating Relative Humidity 0 - 95 (non-condensing) %
• Operating Elevation 0-10000ft (0-3000meters)
• Storage Temperature -15 - 45 °C
• Storage Relative Humidity 0 - 95 (non-condensing) %
• Storage Elevation 0-50000ft (0-15000meters)
• Audible noise at 1 meter from surface of unit 55.0dBA
• Online thermal dissipation 1402.0BTU/hr
• Protection Class IP 20
• Conformance
• Approvals CSA C22.2 No.107.3-05, ENERGY STAR V2.0 (USA), FCC Part 15 Class A, UL 1778
• Standard warranty 3 years repair or replace (excluding battery) and 2 years for battery
• Sustainable Offer Status
• RoHS Compliant
• REACH REACH: Contains No SVHCs
• Battery Directive Compliant
• Proposition 65 Warning Available in Documentation tab
• URL