Call NOW for quantity and project pricing
M4500 Managed Switch with 32x100G QSFP28 ports
Features
Key features:
- Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
- Zero Touch AV over IP with pre-configured L2 Multicast on all models (10G AV encoders and decoders) and SDVoE-ready
- Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
- ptimized for "Spine and Leaf" redundant AV installations, with or without MLAG between spine switches
- Up to 320 TX / 320 RX (10 Gigabit) nodes all line rate with each other in a redundant spine and leaf architecture
- 2 power supply units (APS750W) and 6 redudant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy
- Ultra-low latency (spine 0.13µs @100G; leaf 0.119µs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)
Software:
- Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization
- Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling
- Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG)
- Comprehensive IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR, VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite
- Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 and IGMP Plus enhancement at the VLAN level
- IGMP Plus enhanced implementation for automatic multicast across a L2 network (igmp-plus <vlan-id> easy macro-command)
- High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol
- Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP)
- Priority-Based Flow Control (PFC), DCBX Bridging, Enhanced Transmission Selection (ETS) and VXLAN Gateway for server installations
Availability:
- Two (2) redundant, modular power supplies are pre-installed contributing to business continuity management
- Six (6) hot-swappable fan trays are pre-installed for 4+2 fan redundancy
- Spine and leaf architecture with every leaf switch (10G/25G access) connecting to every spine switch (distributed 100G core)
- Up to 48 paths ECMP routing for load balancing and redundancy
- Link Dependency feature enables or disables ports based on the link state of different ports
Management:
- Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
- Service port for out-of-band 1 Gigabit Ethernet management (OOB)
- Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)
- Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features
- Industry standard command line interface (CLI) only
NETGEAR Warranty
- This product is backed by a NETGEAR ProSAFE
- Limited Lifetime Hardware
- .
- Lifetime Next Business Day Hardware Replacement. Click
- for coverage, availability and terms and conditions.
- ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.
- ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
10G to 100G solution
Higher availability
Industry standard management
Images
Specifications
Specifications
- Product Specifications
- Model Description M4500 Managed Switch with 32x100G QSFP28 ports
- Datasheet (PDF) M4500 Datasheet
- Datasheet (Excel) M4500 Excel
- Ordering Number CSM4532
- Acoustics 64.0dB @ 25°C (77°F) - the noise is reduced when the two PSUs connect to a power source
- Power Consumption (Max) 426 Watts
- 25G SFP28 Ports N/A
- 100G QSFP28 Ports 32 QSFP28 ports (1x100G default mode, other modes can be 1x50G, 1x40G)
- PSU and Fans 2 modular Power Supply Units and 6 modular Fan Trays come pre-installed
- Management CLI only (local console, telnet port 1223 and SSH port 1234)
- Management Ports 1G Ethernet service port for out-of-band management (OOB, RJ45) RS232 straight-through serial RJ45 for local management console
- Form Factor Full width 1U (508mm depth) with two mounting ears (front) and rail kits (back)
- URL
-
BLUE SQUARE GROUP
5555 Anglers Ave Ste 9 - Ft. Lauderdale, FL
-
BLUE SQUARE GROUP
5555 Anglers Ave Ste 9 - Ft. Lauderdale, FL
-
Email Us
info@bluesquare.group
-
Call us
1-866-439-2356
Loading...