Specifications

• RF Data Rate 250 kbps
• Indoor/Urban Range Up to 300 ft (90 m) / 200 ft (60 m) Int’l variant
• Outdoor/RF Line-of-Sight Range Up to 2 miles (3200 m) / 5000 ft (1500 m) Int’l variant
• Transmit Power 63 mW (+18 dBm) Int’l version
• Receiver Sensitivity (1% PER) -102 dBm
• Antenna Type XBee ZB Adapters: Internal Antenna; XBee-PRO ZB Adapters: External RPSMA Antenna
• Frequency Band 2.4 GHz
• Serial Data Interface RS-232 DB9M/DTE or RS-485 (6-position wire terminal block) switch selectable between RS-422 half-duplex, RS-422 full duplex and RS-485
• USB Data Interface USB 2.0 Full Speed (with ESD protection); connects to host via captive 1-meter cable
• Analog IO (AIO) & Digital IO (DIO) 6-position wire terminal block; Analog IO: 0 - 10V, 4 - 20 mA, or +/- 2VDC Differential; Digital IO: Digital Input or sinking driver output
• Network Topologies Point-to-point, Point-to-multipoint, Mesh
• Number of Channels 14
• Spread Spectrum Type Direct Sequence Spread Spectrum
• Filtration Options PAN ID, 64-bit MAC, channel
• Addressing 65,000 available addresses for each channel
• LEDs Power: Glows green when external power is supplied (not active when battery powered to limit power drain) Associate: Blinks when unit is connected and associated on an RF network
• Controls Device reset (internal push button); Identification (internal push button) – relays ID to gateway
• Dimensions (L x W x H) & Weight RS-232, RS-485, AIO, DIO models: 3.60 in x 1.90 in x 1.20 in (9.14 cm x 4.82 cm x 3.04 cm) 2.29 oz (64.92 g) USB models: 2.87 in x 1.80 in x 0.83 in (7.29 cm x 4.57 cm x 2.10 cm) 1.60 oz (45.36 g)
• Operating Temperature -40° C to +70° C
• Input Voltage RS-232, RS-485, AIO, DIO models: 3.7-6VDC and 9-30 VDC USB models: Bus powered (+5V)
• Power Consumption USB: 70 mA Rx and 250 mA Tx (normal operation) / 200 uA (suspend mode)
• Emissions FCC Part 15.247, IC, ETSI/CE, Telec, EN55022 (Class B)
• Safety UL60950, CAN/CSA C22.2 No.60950
• RoHS Yes
• URL