RabbitCore ® RCM3000 Series Microprocessor Core Module RCM3010
  • Guaranteed Satisfaction
  • Easy Returns
  • Authorized Reseller
  • Best Practice
Call for price

Order Now to ship Tomorrow

Free Ground Shipping

OR
Manufacturer Part Number:
RCM3010
Sku:
RCM3010

Features

 

Rabbit 3000 microprocessor at 30 MHz

 
 

Up to 512K Flash/512K SRAM

 
 

52 digital I/O and 6 serial ports (IrDA, HDLC, asynch, SPI)

 
 

3.3V operation, low power “sleepy” modes (< 2mA)

 
 

3.3 V operation

 
 

Powerful Rabbit 3000 microprocessor

 
 

Low-EMI (typically <10 dB µV/m @ 3 m)

 
 

Built-in Ethernet for simplified connectivity

 
 

Up to 512K Flash/512K SRAM

 
 

52 digital I/O

 
 

6 serial ports (IrDA, SDLC/HDLC, Async, SPI)

 
 

Low power "sleepy" modes (<2mA)

 

Specifications

Specifications

  • mfg_part_number RCM3010
  • Microprocessor Rabbit® 3000 @ 30 MHz
  • EMI Reduction Spectrum spreader for reduced EMI (radiated emissions)
  • Ethernet Port 10Base-T interface, RJ-45, 2 LEDs
  • Flash Memory 256K
  • SRAM 128K
  • Backup Battery Connection for user-supplied backup battery (to support RTC and SRAM)
  • General Purpose I/O 52 parallel digital I/O lines:
  • Additional Digital Inputs 2 startup mode, reset in
  • Additional Digital Outputs Status, rest out
  • Auxiliary I/O Bus 8 data lines and 6 address lines (shared with I/O) plus I/O read/write
  • Serial Ports 6 shared high-speed, CMOS-compatible ports:
  • Serial Rate Maximum asynchronous baud rate = CLK/8
  • Slave Interface A slave port allows the RCM3000 to be used as a master or as an intelligent peripheral device with Rabbit-based or any other type of processor
  • Real-Time Clock Yes
  • Timers Ten 8-bit timers (6 cascadable from the first), one 10-bit timer with 2 match registers
  • Watchdog/Supervisor Yes
  • Pulse/Width Modulators 10-bit free-running counter and four pulse-width registers
  • Input Capture 2-channel input capture can be used to time input signals from various port pins
  • Quadrature Decoder 2-channel quadrature decoder accepts inputs from external incremental encoder modules
  • Power 3.15V to 3.45VDC 150 mA @ 3.3V
  • Operating Temperature –40° C to +70° C
  • Humidity 5% to 95%, non-condensing
  • Connectors Two 2 × 17, 2 mm pitch
  • URL
 
  Loading...