Specifications

• mfg_part_number BL2110
• Microprocessor Rabbit 2000 at 22.1 MHz
• Ethernet Port 10Base-T, RJ-45, link and activity LEDs
• Flash 256K (standard)
• SRAM 128K (standard)
• Backup Battery Socketed 3V lithium coin-type, 265 mA.h, supports RTC and SRAM
• Keypad/Display See keypad/display option (below) and our "OP" products (for serial display options)
• Digital Inputs 24: protected to ± 36VDC
• Digital Outputs 16: source/sink 200 mA each, 36VDC max.
• Analog Inputs None
• Analog Outputs None
• Serial Ports 4 total: two 3-wire (or one 5-wire) RS-232, 1 RS-485, and one 5V CMOS-compatible (programming)
• Serial Rate Max. burst rate = CLK/32; Max. sustained rate = burst/2
• Connectors Screw terminals support max. 14 AWG/1.5 mm2 (standard)
• Real-Time Clock Yes
• Timers Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers
• Watchdog Timer/Supervisor Yes
• Power 9-36VDC, 1.5W max. (without display), 3W max. (with display)
• Operating Temperature 0° C to 50° C
• Humidity 5-95%, non-condensing
• Board Size 3.00’’ x 2.6’’ x 0.75’’; (76 mm x 66 mm x 19 mm)
• LCD Panel 122 × 32 graphic LCD in two stacked sections (with programmable backlight); Relegendable keypad with 7-key/7-LED interface
• LEDs 7 user-programmable: 1 red, 4 green, 2 yellow
• Enclosure Size 5.60’’ x 4.875’’ x 1.5’’; (142 mm x 124 mm x 38 mm)
• URL