Specifications

• mfg_part_number Digi XBee S2C DigiMesh 2.4
• TRANSCEIVER CHIPSET PERFORMANCE
• DATA RATE RF 250 Kbps, Serial up to 1 Mbps
• INDOOR/URBAN RANGE* Up to 200 ft (60 m)
• OUTDOOR/RF LINE-OF-SIGHT RANGE* Up to 4000 ft (1200 m)
• TRANSMIT POWER 3.1 mW (+5 dBm) / 6.3 mW (+8 dBm)boost mode
• RECEIVER SENSITIVITY (1% PER) FEATURES
• SERIAL DATA INTERFACE UART, SPI
• CONFIGURATION METHOD API or AT commands, local or over-the-air (OTA)
• FREQUENCY BAND ISM 2.4 GHz
• FORM FACTOR Through-Hole, Surface Mount
• HARDWARE S2C
• ADC INPUTS (4) 10-bit ADC inputs
• DIGITAL I/O 15
• ANTENNA OPTIONS Through-Hole: PCB Antenna, U.FL Connector, RPSMA Connector, or Integrated Wire
• OPERATING TEMPERATURE -40º C to +85º C
• DIMENSIONS (L X W X H) AND WEIGHT NETWORKING AND SECURITY
• PROTOCOL XBee 802.15.4 (Proprietary 802.15.4)
• UPDATABLE TO DIGIMESH PROTOCOL Yes
• UPDATABLE TO ZIGBEE PROTOCOL Yes
• INTERFERENCE IMMUNITY DSSS (Direct Sequence Spread Spectrum)
• ENCRYPTION 128-bit AES
• RELIABLE PACKET DELIVERY Retries/Acknowledgements
• FILTRATION OPTIONS PAN ID, Channel, and 64-bit addresses
• CHANNELS POWER REQUIREMENTS
• SUPPLY VOLTAGE 2.7 to 3.6V
• TRANSMIT CURRENT 120 mA @ 3.3 VDC
• RECEIVE CURRENT 31 mA @ 3.3 VDC
• POWER-DOWN CURRENT REGULATORY APPROVALS
• FCC, IC (NORTH AMERICA) Yes
• ETSI (EUROPE) No
• RCM (AUSTRALIA AND NEW ZEALAND) No (Coming soon)
• TELEC (JAPAN) Performance
• RF Data Rate 250 Kbps
• Indoor/Urban Range 200 ft (60 m)
• Outdoor/RF Line-of-Sight Range 2500 ft (750 m)
• Transmit Power 10 mW (+10 dBm)
• Receiver Sensitivity (1% PER) Features
• Serial Data Interface 3.3V CMOS serial UART
• Configuration Method AT & API
• Frequency Band 2.4 GHz ISM
• Interference Immunity DSSS (Direct Sequence Spread Spectrum)
• Serial Data Rate Up to 115.2 Kbps
• ADC Inputs (6) 10-bit ADC inputs
• Digital I/O 13
• Antenna Options Networking & Security
• Encryption 128-bit AES
• Reliable Packet Delivery Retries/Acknowledgments
• Addressing Options PAN ID, Channel, 64-bit address
• Channels Power Requirements
• Supply Voltage 2.8 – 3.4VDC
• Transmit Current 150 mA (Wire, Chip, U.FL),
• Receive Current 55 mA
• Power-Down Current Regulatory Approvals
• FCC (USA) Regulatory Approvals
• IC (Canada) Regulatory Approvals
• ETSI (Europe) No
• C-TICK (Australia) No
• Telec (Japan) No
• URL