Wall Mount Bracket - Mounts ConnectPort X4, Digi Connect WAN, Digi Connect WAN 3G, Digi Wi-Point 3G and PortServer TS 1/2/4 products to flat surface without power cord hook
Wall Mount Bracket - Mounts ConnectPort X4, Digi Connect WAN, Digi Connect WAN 3G, Digi Wi-Point 3G and PortServer TS 1/2/4 products to flat surface without power cord hook
Features
ConnectPort X4 customizable Cellular M2M gateways offer a variety of LAN/WAN interface options for end-to-end networking of remote devices. The gateways include comprehensive IP protocols and IPSec VPN support for high-end routing and security. The easy DIA/Python development environment enables custom applications to run locally while interfacing across cellular networks for WAN connectivity to a centralized server.
Specifications
Specifications
-
LTE CAT 1
N/A
-
HSPA+ (U9)
850/900/1700 (AWS)/1900/2100 MHz; Transfer Rate (max): 5.76 Mbps up, 21 Mbps down
-
CDMA 1xRTT (Bx)
800/1900 MHz; Transfer rate (max): 153 Kbps up/down
-
Connector
1 or 2 x SMA (Center pin - on device: female; on antenna: male)
-
SIM Slots
2 or 0 (CDMA variants)
-
SIM Security
SIM slot cover plates
-
Standard
Zigbee (2.4 GHz), DigiMesh (2.4 GHz or 900 MHz), XBee-PRO 900HP, 802.15.4 or 868
-
Connector
1 x RP-SMA (Center pin - on device: male; on antenna: female)
-
Ports
1
-
Standard
RS-232
-
DTE/DCE
DTE
-
Signal Support
TXD, RXD, RTS, CTS, DTR, DSR and DCD
-
Flow Control
Hardware and software flow control
-
COM Port Redirector
RealPort®
-
Throughput
Up to 230 Kbps
-
Connector
DB-9 Male
-
Ports
1
-
Standard
IEEE 802.3
-
Physical Layer
10/100Base-T
-
Data Rate
10/100 Mbps (auto-sensing)
-
Mode
Full or Half duplex (auto-sensing)
-
Interface
Auto MDI/MDIX
-
Connector
RJ-45
-
Ports
N/A
-
Connector
N/A
-
Ports
1
-
Standard
USB 1.1
-
Signaling
Full-speed
-
Connector
Type A
-
Management (Cloud-based)
Digi Remote Manager
-
Management (Local)
Web Interface via HTTP/HTTPS, Password access control, IP service port control; CLI via serial port, Telnet, Python scripting; Digi SureLink™ "always-on" connection)
-
Security
SSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS)
-
Network Protocols
UDP/TCP, DHCP, SNMPv1/v2
-
VPN
IPsec with IKE/ISAKMP; Multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, GRE forwarding; Simple Certificate Enrollment Protocol (SCEP) for X.509 certificate
-
Routing
NAT, NAT-T (NAT traversal) VPN tunneling, Port forwarding, VPN/GRE pass-through; Access control lists (IP filtering), IP pass-through, Virtual Router Redundancy Protocol (VRRP) per RFC 3768
-
Industrial Protocol Support
Modbus bridge enables Modbus serial to Modbus/TCP conversion; Integrated Python code allows gateway to act as Modbus client/master or Modbus server/slave; Functions like an Ethernet to serial bridge, but uses XBee to transport serial data; Handles unique timing issues per Modbus protocol rules; Uses Modbus Unit ID to look up IP or mesh MAC address.
-
Real-Time Clock
Yes
-
Memory
16 MB Flash, 32 MB RAM
-
Input
6-30 VDC
-
Consumption
Idle: 1.5 W, Max: 10.4 W
-
Protection
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
-
Connector
Locking barrel
-
DC Power Cord*
Available upon request
-
AC Power Supply*
12 VDC power supply for 0º C to 40º C (32º F to 104º F) included; Extended temperature power supply available separately
-
Battery Backup
N/A
-
Surge Protection
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
-
External Power Supply
12 VDC power supply for 0º C to 60º C (32º F to 140º F) with locking barrel connector included; Extended temperature power supply available separately
-
Dimensions (L x W x H)
5.25 in x 3.35 in x 1.00 in (13.33 cm x 8.50 cm x 2.54 cm
-
Weight
0.44 lb (0.20 kg)
-
Status LEDs
Ethernet status, Power, Cellular link/activity, Signal strength (4 bars), XBee link/activity
-
Enclosure Material
Industrial (metal)
-
Enclosure Rating
N/A
-
Mounting
Wall-mount bracket sold separately
-
Operating Temperature***
-30º C to +75º C (-22 F to +167 F)
-
Storage Temperature
-40º C to +85º C
-
Relative Humidity
5% to 95% (non-condensing)
-
Ethernet Isolation
1500VAC min per IEEE 802.3/ANSI X3.263
-
Serial Port Protection (ESD)
+15 kV Air Gap and +8 kV contact discharge per IEC 1000-4-2
-
Hazardous (Class 1 Div 2)
No
-
GSM/UMTS
PTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511
-
CDMA/EV-DO
CDG, TIA/EIA-690, TIA/EIA-98-E
-
Cellular Carriers
Certified by most major carriers. See www.digi.com for current listing.
-
Safety
UL 60950, CSA 22.2 No. 60950, EN60950; Class 1 Div 2 (IA model only)
-
Emissions/Immunity
CE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55022, Class A
-
Product Warranty
5 years
-
URL