ConnectPort X4 customizable Cellular M2M gateways offer a variety of LAN/WAN interface options for end-to-end networking of remote devices. The gateways include comprehensive IP protocols and IPSec VPN support for high-end routing and security. The easy DIA/Python development environment enables custom applications to run locally while interfacing across cellular networks for WAN connectivity to a centralized server.
Specifications
Specifications
LTE CAT 1N/A
HSPA+ (U9) 850/900/1700 (AWS)/1900/2100 MHz; Transfer Rate (max): 5.76 Mbps up, 21 Mbps down
CDMA 1xRTT (Bx)800/1900 MHz; Transfer rate (max): 153 Kbps up/down
Connector1 or 2 x SMA (Center pin - on device: female; on antenna: male)
SIM Slots2 or 0 (CDMA variants)
SIM SecuritySIM slot cover plates
StandardZigbee (2.4 GHz), DigiMesh (2.4 GHz or 900 MHz), XBee-PRO 900HP, 802.15.4 or 868
Connector1 x RP-SMA (Center pin - on device: male; on antenna: female)
Ports1
StandardRS-232
DTE/DCEDTE
Signal SupportTXD, RXD, RTS, CTS, DTR, DSR and DCD
Flow ControlHardware and software flow control
COM Port RedirectorRealPort®
ThroughputUp to 230 Kbps
ConnectorDB-9 Male
Ports1
StandardIEEE 802.3
Physical Layer10/100Base-T
Data Rate10/100 Mbps (auto-sensing)
ModeFull or Half duplex (auto-sensing)
InterfaceAuto MDI/MDIX
ConnectorRJ-45
PortsN/A
ConnectorN/A
Ports1
StandardUSB 1.1
SignalingFull-speed
ConnectorType A
Management (Cloud-based)Digi Remote Manager
Management (Local)Web Interface via HTTP/HTTPS, Password access control, IP service port control; CLI via serial port, Telnet, Python scripting; Digi SureLink™ "always-on" connection)
SecuritySSL tunnels, SSHv2, FIPS 197 (IPsec, HTTPS)
Network ProtocolsUDP/TCP, DHCP, SNMPv1/v2
VPNIPsec with IKE/ISAKMP; Multiple tunnel support; DES, 3DES and up to 256-bit AES encryption; VPN pass-through, GRE forwarding; Simple Certificate Enrollment Protocol (SCEP) for X.509 certificate
RoutingNAT, NAT-T (NAT traversal) VPN tunneling, Port forwarding, VPN/GRE pass-through; Access control lists (IP filtering), IP pass-through, Virtual Router Redundancy Protocol (VRRP) per RFC 3768
Industrial Protocol SupportModbus bridge enables Modbus serial to Modbus/TCP conversion; Integrated Python code allows gateway to act as Modbus client/master or Modbus server/slave; Functions like an Ethernet to serial bridge, but uses XBee to transport serial data; Handles unique timing issues per Modbus protocol rules; Uses Modbus Unit ID to look up IP or mesh MAC address.
Real-Time ClockYes
Memory16 MB Flash, 32 MB RAM
Input6-30 VDC
ConsumptionIdle: 1.5 W, Max: 10.4 W
Protection4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
ConnectorLocking barrel
DC Power Cord*Available upon request
AC Power Supply*12 VDC power supply for 0º C to 40º C (32º F to 104º F) included; Extended temperature power supply available separately
External Power Supply12 VDC power supply for 0º C to 60º C (32º F to 140º F) with locking barrel connector included; Extended temperature power supply available separately
Dimensions (L x W x H)5.25 in x 3.35 in x 1.00 in (13.33 cm x 8.50 cm x 2.54 cm
Weight0.44 lb (0.20 kg)
Status LEDsEthernet status, Power, Cellular link/activity, Signal strength (4 bars), XBee link/activity
Enclosure MaterialIndustrial (metal)
Enclosure RatingN/A
MountingWall-mount bracket sold separately
Operating Temperature***-30º C to +75º C (-22 F to +167 F)
Storage Temperature-40º C to +85º C
Relative Humidity5% to 95% (non-condensing)
Ethernet Isolation1500VAC min per IEEE 802.3/ANSI X3.263
Serial Port Protection (ESD)+15 kV Air Gap and +8 kV contact discharge per IEC 1000-4-2
Hazardous (Class 1 Div 2)No
GSM/UMTSPTCRB, NAPRD.03, GCF-CC, R&TTE, EN 301 511
CDMA/EV-DOCDG, TIA/EIA-690, TIA/EIA-98-E
Cellular CarriersCertified by most major carriers. See www.digi.com for current listing.
SafetyUL 60950, CSA 22.2 No. 60950, EN60950; Class 1 Div 2 (IA model only)
Emissions/ImmunityCE, FCC Part 15 (Class A), AS/NZS CISPR 22, EN55024, EN55022, Class A