Digi TransPort WR11 XT delivers a cost-optimized 4G LTE connection to mission critical M2M applications around the world. These cellular routers are ideal for connecting:
LOCAL MANAGEMENTWebUI (HTTP/HTTPS); CLI (Telnet, SSH, SMS)
MANAGEMENT/
TROUBLESHOOTING TOOLSFTP, SFTP, SCP; Protocol analyzer with PCAP for Wireshark; Event logging with Syslog and SMTP; NTP/SNTP
MEMORY20 MB RAM, 10 MB file space
PORTS(1) RJ-45; 10/100 Mbps (auto-sensing)
DIMENSIONS (L X W X H)3 in x 4 in x 1 in (7.62 cm x 10.16 cm x 2.54 cm)
WEIGHT0.5 lb (.22 kg)
STATUS LEDSPower on, WWAN signal strength, WWAN service
ENCLOSUREIndustrial (Metal) / IP30
POWER INPUT5 VDC, 15W minimum power source required
POWER SUPPLYMust be used with a Digi approved power supply
POWER CONSUMPTION3.5W typical (Idle); 10W typical (Peak Tx/Rx)
OPERATING TEMPERATURE-30° C to +70° C (-22° F to +158° F) Reduced cellular performance may occur above +60° C
RELATIVE HUMIDITY5% to 95% (non-condensing)
CELLULARPTCRB
SAFETYUL 60950, CSA 22.2 No. 60950, EN60950
EMISSIONS/IMMUNITYCE, FCC Part 15 Class B, AS/NZS CISPR 22, EN55024, EN55022 Class B
PRODUCT WARRANTY5 years
PROTOCOL SUPPORTHTTP, HTTPS, FTP, SFTP, SSL, SMTP, SNMP (v1/v2c/v3), SSH, Telnet and CLI for web management;remote management via Digi Remote Manager; SMS management, protocol analyzer, ability to capture PCAP for use with Wireshark;DynDNS; Dynamic DNS client compatible with BIND9/No-IP/DynDNS
SECURITY/VPNIP filtering, stateful inspection firewall with scripting, address and port translation; VPN: IPSec with IKEv1, IKEv2, NAT Traversal; SSL, SSLv2, SSLv3, FIPS 197, open VPN client and server; PPTP, L2TP; (5) VPN tunnels (upgradable to a maximum of 50); Cryptology: SHA-1, MD5, RSA; Encryption: DES, 3DES and AES up to 256-bit (CBC mode for IPsec); Authentication: RADIUS, TACACS+, SCEP for X.509; certificates; Content filtering (via 3rd party); MAC address filtering; VLAN support
ROUTING/FAILOVERIP pass-through; NAT, NAPT with IP port forwarding; Ethernet bridging; GRE; Multicast routing; Routing protocols: PPP, PPPoE, RIP (v1, v2) OSPF, SRI, BGP, iGMP routing (multicast); RSTP (Rapid Spanning Tree Protocol); IP failover: VRRP, VRRP+TM; Automatic failover/ failback to second GSM network/standby APN
OTHER PROTOCOLSDHCP; Dynamic DNS client compatible with BIND9/No-IP/DynDNS; QoS via TOS/DSCP/WRED