APC AV J Type 1.5kVA Power Conditioner with Battery Backup 120V
Features
J25B Features
APC AV J Type 1.5kVA Power Conditioner with Battery Backup 120V
Audio-video power protection from blackouts, voltage sags & swells, electrical noise interference and damaging power transients
Includes: CD with software, User Manual
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.
Specifications
Specifications
Key Features
Output power capacity865Watts
/ 1.5kVA
Output Connections(6)
NEMA 5-15R
(Battery Backup)
(2)
NEMA 5-15R
(Surge Protection)
Nominal Output Voltage120V
Nominal Input Voltage120V
Input ConnectionsNEMA 5-15P
Serviceability
Front-access servicingSimplifies installation and UPS maintenance while minimizing space requirements.
Multiple mounting methodsAllows for standardization on one product for use in different environments.
Resettable circuit breakersEnables a quick recovery from overload events.
Manageability
Sequenced turn on/offHelps power on components in the proper order to prevent speaker stress. Proper sequencing can also help manage current draw on startup to prevent unnecessary circuit breaker tripping.
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
LED & display dimmerAdjust the unit's LED and display brightness independently of each other to suit your individual tastes and environment.
Protection
Boost and Trim Automatic Voltage Regulation (AVR). (Does not apply to J25B)Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Isolated power filter banksEliminates electromagnetic and radio frequency interference (EMI/RFI) as a source of audio-video signal degradation.
Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.
Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.
Output
Max Configurable Power (Watts)865Watts
/ 1.5kVA
Output Frequency (sync to mains)50/60Hz +/- 3 Hz
TopologyLine Interactive
Waveform typeStepped approximation to a sinewave
Transfer Time4ms typical : 8ms maximum
Input
Input frequency50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations98 - 132V
Batteries & Runtime
Battery typeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules1
Typical recharge time16hour(s)
Replacement BatteryAPCRBC130
Expected Battery Life (years)2 - 4
RBC Quantity1
Battery Charge Power (Watts)12Watts
Battery Volt-Amp-Hour Capacity190
RuntimeView Runtime Graph
View Runtime Chart
EfficiencyView Efficiency Graph
Surge energy rating345Joules
Physical
Maximum Height3.84inches
(97MM, 9.76CM)
Maximum Width17.0inches
(431MM, 43.18CM)
Maximum Depth16.0inches
(406MM, 40.64CM)
Net Weight25.74lbs.
(11.7KG)
Shipping weight30.14lbs.
(13.7KG)
Shipping Height8.07inches
(205MM, 20.51CM)
Shipping Width22.0inches
(558MM, 55.88CM)
Shipping Depth21.24inches
(539MM, 53.94CM)
ColorBlack
Master Carton Units2.0
Master Carton Weight64.81lbs.
(29.46)
SCC Codes1073130427741 2
Environmental
Operating Temperature32 - 104 °F
(0 - 40 °C)
Operating Relative Humidity0 - 95 %
Operating Elevation0-10000ft
(0-3000meters)
Storage Temperature-15 - 40 °C
Storage Relative Humidity0 - 95 %
Storage Elevation0-10000ft
(0-3000meters)
Audible noise at 1 meter from surface of unit45.0dBA
Conformance
ApprovalsCalifornia (CEC) Battery Charger, FCC Part 15 Class B, UL 1778
Equipment protection policyLifetime : $350000
Standard warranty3 years repair or replace
Sustainable Offer Status
RoHSCompliant
REACHREACH: Contains SVHCs
Proposition 65 WarningAvailable in Documentation tab